The TP-R420C-S/TP-R1000C-S intelligent artificial climate incubator for animals and plants can accurately control temperature, humidity, and light intensity, providing an ideal artificial climate environment for various experiments. The intelligent artificial climate incubator for animals and plants can be used to study the effects of low and high temperature stress on the growth of plants and crops, as well as research on high and low temperature germination of economic crop seeds, seed seedling cultivation, seed germination, plant cultivation, microbial cultivation, mycelial cultivation, etc.
The Intelligent Crops Study Analysis System is suitable for seed testing and analysis of corn, rice, wheat, soybeans, vegetables, and other seeds. The system uses high-precision weighing sensors and high-resolution cameras to capture the tested seeds. While obtaining the weight of the seeds, it calculates the number of seeds planted and quickly obtains data on the thousand/hundred seed weight and seed size.
Counting speed: Corn kernels have a density of 1500-3000 kernels per minute, while other kernels have a density of 1200-20000 kernels per minute
Numerical error: ≤ ± 0.5%, monitoring correction reaches 100% accuracy
Thousand particle weight error: ≤ ±0.5%
Weighing range: 0 ～ 5k
Model Comparison:
This instrument is suitable for scientific research and teaching in the agricultural industry, specifically for testing the hardness of grains (corn, wheat, rice, rice, etc.), and can also be used for hardness testing of horticultural seeds, pills, nuts, cookies, etc. The instrument adopts advanced force measurement technology and has a beautiful appearance. It can be handheld measured at the acquisition site or tested on a laboratory workbench.
TPGA-2000 Near-infrared soybean analyzer is applicable for the efficient, fast, non-destructive, quantitative analysis of moisture, protein, fat of the soybean, to provide rapid detection methods for soybean quality identification. The instrument can be used in laboratories, workshops, fields, and other differences.
The Seed shape analysis system can deeply analyze the seed’s shape, size, damage, such as rice, corn, wheat, rape, and soybean, and adopt high-precision weighing sensors and high-resolution cameras to shoot tested seeds. It can measure the number of smooth grains, 1000/100-grain weight, and average grain shape (including length, width, aspect ratio, perimeter, and area).
1. System: 8 inches in size, 1200*1920 resolution, 13 million rear camera brand tablet computer, Android system, easy to operate.
2. Speed: 6S/sample.
3. Applicable crops: seeds of various crops after threshing, such as rice, wheat, maize, rape, beans, peanuts, sesame, and
sorghum.
4. Detection range: 50-1500 conventional grains (rice, wheat, etc.) and 1000-10000 small grains (rape, sesame, etc.).
5. Accuracy: round seeds ±0.1%, long seeds ±0.3%, can be monitored and corrected to 100%, and the error of grain type ≤0.3%.
6. Data accuracy: the errors of average area, average perimeter, average length, and average width are less than 0.5%.
7. Data storage: EXCEL tables can be exported, or can be saved in large quantities at the same time. It supports the local view
and export of tables to the PC side for viewing.
8. Data upload: Users can register the instrument cloud platform account and upload the data to the designated account to realize
the functions of data viewing, statistics and analysis.
9. Continuous working time: 6 hours.
TPGA-2000 Near-infrared soybean analyzer is applicable for the efficient, fast, non-destructive, quantitative analysis of moisture, protein, fat of the soybean, to provide rapid detection methods for soybean quality identification. The instrument can be used in laboratories, workshops, fields, and other differences.
Characteristics
1. Microcomputer automatic control, have touch-key, complete automated operation.
2. Count speed is adjustable, high accuracy, metal shell, and elegant appearance.
3. Both round and long seeds are suitable
1. Count Range: Small and middle sample: 0.7~4 mm×0.7~12mm
Big sample: 3~10mm×3~12 mm
2. Count Accuracy: Big and middle sample: 2/1000 small sample: 4/1000
3. Count Speed: ≥1000 /3min (it’s based on level 2, if you want fast you can turn to level 3-7)
4. Count Capacity: 1~99999
5. Power: AC 110V / 220V, 50±10Hz
6. Continuous working time: ≥ 5HrCharacteristics
Production description
Suitable for corn, rice, wheat, rape, vegetables and other seeds. It has an automatic sample separation function.
Technical parameters
Working principle
To remove dead&light seeds and particles from the good seeds.
Application range
Suitable for small and light seeds, including sesame, flower seeds, rapeseeds, grass seeds, etc.
Working principle
To remove dead&light seeds and particles from the good seeds.
Application range
Suitable for large seeds, including corn, wheat, rice, soybean, etc
Characteristics
The Precision Divider has repeatedly demonstrated its ability to precisely divide larger samples into working size samples in a matter of seconds. It is ideal for smaller seeded crops.
Dividing and mixing are accomplished by the centrifugal action of a motor driven revolving neoprene disc positioned under the hopper. A smooth inside chrome plated finish virtually eliminates any of the samples sticking to the inner surfaces. Both the hopper and cylinder top lift off to provide easy access to the interior of the dividing chamber.
SLY-D/SLY-E Automatic Seed Counter With High Accuracy
Brief Introduction:
Top Cloud-agri’s Automatic Seed Counter, also can be called Tablet Counter, it is used to fill bottles or other packaging with the correct number of pills, tablets, capsules or soft gels, dentures,pearls, and different kinds of seeds. Beauty in design and high accuracy in counting.
Characteristics:
1.Both sides of the work table adopts slope design according to the human body engineering principle, the operation is comfortable and labor-saving.
2.Removable drawer is under the instrument to store well-chosen seeds.
3.Extended edge is designed on the left, right and back side of workbench to avoid seeds’ lateral leakage.
Read More
Characteristics:
1.Both sides of the work table adopts slope design according to the human body engineering principle, the operation is comfortable and labor-saving.
2.Removable drawer is under the instrument to store well-chosen seeds.
3.Extended edge is designed on the left, right and back side of workbench to avoid seeds’ lateral leakage.
4.Glass surface can be drawled out to replace tube easily.
5.The original seeds-fall holes are advantageous to take out the chosen seeds.
6.Metal structure, ultra thin observation platform, provided with desktop illumination magnifying glass.
7.Standard configuration contains 2 different chromaticity glasses with wide applicability.
Technical parameters:
Magnification: 0-7 times
Power: ≤30W
Surface size: 320 * 320mm
Table base size: 940 * 330mm
Luminous panel size: 280*280mm
Laboratory Riffle Divider-Riffle Sample Splitter
Riffle splitters are typically used in assay and analytical laboratories to reduce the size of samples provided from other sources (crushed rock, soils, powders and so on) to a lot size, and this process is suitable for the next stage of sample analysis.
Model: HGG-I /HGG-II
The Breeding Plot Crop Yield Estimation System is an intelligent device designed for crop regional trials and breeding trial units to measure crop yields in the experimental plots. The system realizes the automatic recording and digital display of the production measurement data throughout the process.
Read More
1. Static image capture: A megapixel camera system does not need a dark room. The software collects pictures in real time, and images in real time. It can store the pictures taken.
2. Image processing: The software provides a variety of image processing methods, including viewing the original image, edge enhancement, anti color display, pseudo color display, horizontal mirror image, clockwise rotation, window width and window level adjustment, local enhancement, histogram equalization, image measurement, image clipping, image scaling, etc. It can analyze and process images from multiple angles, operate with one key, and complete with one key.
1. Standard 14 inch laptop, Windows10 operating system, supporting wired wireless data transmission
2. Boundary dimension: 1350 * 800 * 710 mm
3. Digital imaging field of view: 350 * 430 mm (different areas can be customized)
4. The maximum allowable thickness shall not exceed 200-600 mm
5. Weight: 350KG
6. Pixel pitch: 140 um (digital HD imaging)
7. A/D conversion: 16Bits
8. Spatial resolution: 3.6LP/mm
9. Tube voltage/current: 40-60 kv
10. X-ray tube current: 1-10 mm
11. X camera protection: lead cabinet
12. Standard configuration: detection device host, laptop, network cable, foot switch, power cord, dongle
The rice appearance quality tester is a professional instrument that automatically detects the appearance quality indicators of rice and rice by obtaining rice images through a scanner. It can automatically analyze and evaluate various types of rice (japonica rice, indica rice, indica glutinous rice, japonica glutinous rice, black rice, yellow rice, embryo rice, etc.).
The total number of rice grains, thousand grain weight, grain type (length, width, aspect ratio, circumference, area, and roundness), national standard polished rice number, pure polished rice number, polished rice rate, broken rice grain number, chalky rice grain number, chalky grain rate, chalky area, chalkiness degree, transparency, imperfect grain number, yellow rice grain rate, rice color yellowing index and rice whiteness determination, impurity amount, different varieties of grains, imperfect grains (immature grains, diseased grains, insect eroded grains, etc.), as well as the number of glutinous rice grains in glutinous rice, glutinous rice rate, rice cracking rate, brown rice embryo rate, etc
Scanner: Optical resolution of 4800 × 9600dpi, transparent scanning area of 30 cm × 20 cm, minimum pixel size of 0.0053mm × 0.0026mm, and the weight of rice can reach 30g in one scan
Scanner dimensions: 576 mm (L) × 297 mm (W) × 118 mm (H)
Scanner weight: 6.4 kg
Scanner power: 38 W (15V, 2.5A)
Operating temperature: 10 ℃ ~35 ℃
Operating humidity: 20%~85% RH
Single test sample size: <3000 pieces, recommended sample size is about 12g
Measurement error of length and width: ≤ ± 0.05mm
Precision rice rate error: ≤ ± 1.0%
Chalkiness: ≤ ± 1.0%
Yellow grain rice repeatability error: ≤ ± 0.5%
Model list:
| Model | Function |
| TZS-1K | ü Direct measure soil moisture content, and save in handset |
| TZS-2X | ü Measure soil moisture content, soil temperature, and save in handset |
| TZS-3X | ü Adding measure atmospheric temperature function based on TZS-2X |
| TZS-5X | ü Adding measure atmospheric moisture, dew point based on TZS-3X |
Handset:
Software:
Can test soil moisture, temperature and conductivity outdoors
It is mainly used for horticulture and soil research
The main advantage is that it can get ECP when testing soil moisture and temperature
Soil temperature range: -5~50°C
Soil temperature accuracy: ±1.5°C
Soil temperature solution: 0.1°C
EC range: 0-200ms.m-1
EC accuracy: ±10ms.m-1
EC resolution: 0.1 °C
Soil moisture range: 0-100%
Soil moisture accuracy: 3%
Soil moisture solution: 0.1%
Working frequency: 20 Mhz
Working Environment: interface waterproof level IP65, working temperature: 0-50°C
Probe size: d=3mm*Length=68mm (middle probe 5mm*60mm)
Working voltage: 6-10vdc
Response time: 2.5s
Standard cable: 2m
System composition:
Reading: HH2, can store 2100 data
WET sensor: measure soil moisture, temperature and conductivity
Battery, communication cable, software, manual and portable box
Characteristic:
Characteristic:
Handset:
Software：
Handset parameters:
| Model | Function |
| TJSD750 | General type, display soil compaction(KPa, kg/c㎡, N/c㎡) directly, with data saving function |
| Range | 0~10,000KPa; 0~100kg/c㎡; 0~1,000N/c㎡ (switchable) |
| Depth | 0~375mm(measuring rod is 400mm) |
| Accuracy | ±0.5‰ FS |
| Position accuracy | Three decimal ±0.05(≤50m) |
Test N,P,K, organic matter, soil pH, soil salinity, Soil moisture. Built-in the amount of nutrients needed for growth of 73 kinds of crops, can provide guidance for fertilizing amount according to needs. With a software, be able to connect to computer for data storage.
Product Features:
Technical Parameters:
Soil Nutrient:
Stability: Absorbency of light drift ＜ 0.003
Repeatability: Absorbency of light ＜ 0.005
Linearity errors: Red light for Copper sulfate, and blue light forpotassium; bichromate ＜ 3.0%
Sensitivity: Red light ≥ 4.5×10-5; Blue light ≥ 3.17×10-3
Wavelength range: Red light 620±5nm; Blue light440±5nm
Anti-Knocking performance: Qualified
pH:
Testing range: 0-14PH
Error: ±0.1
Salinity：
Testing range: 0.01-1.00%
Error: ±5%
Soil moisture:
Moisture unit: % (m3/m3)
Accuracy: ≤ 2%
Moisture content rate testing range: 0-100%
Instrument:
Display mode: LCD display
Interface: USB
Working environment: 0~40℃ 35~85%RH
Alternating current (AC): 220V-240V, 50Hz, adapter: 12V/3A
Size: 32*28*11cm
1. High accuracy and high resolution: large screen LCD display, with backlight function (backlight for night use), inverted reverse function of numbers on the screen
2. Battery capacity display: divide into 3,2and1 grids. If battery capacity is too low, the instrument will shut down automatically
3. Gravity acceleration setting function: users can input the exact value of gravity acceleration of testing site to make the test more precise4
Characteristic
1. High accuracy and high resolution: large screen LCD display, with backlight function (backlight for night use), inverted reverse function of numbers on the screen 2. Battery capacity display: divide into 3,2and1 grids. If battery capacity is too low, the instrument will shut down automatically3. Gravity acceleration setting function: users can input the exact value of gravity acceleration of testing site to make the test more precise4. Peak value maintaining function: maintain the peak value display until zero adjustment manually 5. Automatic peak function: maintain displaying the peak values for 2S before automatic elimination 6. Large memory storage function: can store 896 measuring values. 7. Data output function, data can be imported to the computer for various analyses 8. Auto-off time setting: 10min-90 min automatic shutdown can be set. 9. High quality charging power: 100-240v of charging voltage can be available
Technical parameters
| Maximum load | 1. 100Kg (Kg and N can be switched automatically) |
| Accuracy | ±0.5% |
| Resolution | 0.01kg |
| Measuring depth | 0~450mm |
| Ambient temperature | 0~ 60°C |
| Ambient humidity | ≤ 80% |
| Allowable overload | 150% |
Introduction:
Soil Irrometer tensiometer is made up of pressure gauge, acrylic tube and ceramic probe, after the acrylic tube filled with water, ceramic probe gets wet and it can prevent outside air into the ceramic probe. When there is pressure difference between measured soil water potential and tensiometer, the water in tensiometer will infiltrate into the measured soil until the balance reached. So at that moment, the value shown on the pressure gauge is the measured soil water potential.
Introduction:
Soil Irrometer tensiometer is made up of pressure gauge, acrylic tube and ceramic probe, after the acrylic tube filled with water, ceramic probe gets wet and it can prevent outside air into the ceramic probe. When there is pressure difference between measured soil water potential and tensiometer, the water in tensiometer will infiltrate into the measured soil until the balance reached. So at that moment, the value shown on the pressure gauge is the measured soil water potential.
Technical parameters:
Length can be made as customized. (Standard length is the length of transparent polycarbonate tube in the middle of tension meter tube);
Testing range: 0-1 Bar (1 Bar = 100 Kpa)
Model:
Ten-15 (15cm)
Ten-30(30cm)
Ten-45(45cm)
Ten-60(60cm)
Ten-90(90cm)
Ten-120(120cm)
Brief Introduction:
TRS Digital Soil Water Potential Meter is hsa high accuracy and high resolution, and this soil water potential sensor can test soil temperature and water potential at the same time.
Characteristics:
Technical parameters:
Max load: 100kpa
Resolution: 0.01kpa
Accuracy: ±1
Soil Temperature testing range: –55°C~150°C
Temperature accuracy: ±0.5
Probe quantities: 3
Product Features:
Technical Parameters:
Probe Size: 9.53mm
Resolution: 1 cm; 0.03 kg
Measuring accuracy: ±2 cm; ±0.1% FS
Electricity: 5000 Mah, 10 hours standby time
Measuring depth: 0-45 cm
Charger input voltage: AC100V-240V, 50/60Hz
Size of the whole machine:
Small cone head: 359 mm (L)*94 mm (W)*786 mm (H)
Large cone head: 359 mm (L)*94 mm (W)*800 mm (H)
Small Cone Head Size: Diameter 12.83 mm, area 129 mm2
Large Cone Head Size: Diameter 20.27 mm, area 323 mm2
Measuring unit: Kg/cm2, N/cm2, Kpa; cm
Measuring range:
Small tapered head: 7500 kPa, 100 kg
Large tapered head: 3000 kPa, 100 kg (120% full scale)
Operating conditions:
Temperature range: -5℃ ~ 55
Humidity range: 0%~95%RH
Introduction:
The handheld chlorophyll analyzer can non-destructive detect the relative chlorophyll content and leaf temperature value of leaves. By measuring chlorophyll content, the efficiency of plant photosynthesis and the health status of leaves can be evaluated, which helps to understand the growth and development laws of plants, optimize plant cultivation techniques, and improve crop yields. Widely used in agricultural and forestry related research institutions and universities for the study of plant physiology and guidance of agricultural production.
Technical Parameters:
Measuring Range: chlorophyll : 0.0~99.9SPAD; Leaf surface temperature : 10~99.9℃
Measurement Accuracy: chlorophyll : ± 1.0 SPAD (SPAD values range from 0 to 50 at room temperature) Leaf surface temperature : ±0.5℃
Repeatability: chlorophyll : ± 0.3 SPAD(SPAD values range from 0 to 50 ), Leaf surface temperature : ±0.2℃
Measurement Time Interval: 2 seconds
Measure Area: 2mm*2mm
Power Supply: 2 1.5V dry batteries, capable of continuous measurement up to 5000 times
Data Storage Capacity: Host 1000 pieces of data, unlimited storage in the instrument APP
Introduction:
The plant stem strength tester is used to measure the stem strength of plants such as corn, sorghum, tobacco, etc. It mainly uses pressure sensors to detect the bending, compressive strength, puncture strength, etc. of the stem, and is particularly suitable for agricultural genetic breeding and crop quality variety research.
Product Features:
Technical Parameters:
Dimensions:
Host: 206 mm (L) * 85 mm (W) * 40 mm (H);
Test bracket: 154 mm (L) * 237 mm (W) * 420 mm (H)
Measurement range: 500N
Measurement unit: kg、N、lb
Resolution: 0.01N
Measure stem thickness: 0~40mm
Measurement accuracy: 0.1% FS
Angle measurement range: 0 ～ ±90°
Angle resolution: 0.1 °
Angle accuracy: 0.1 °
Power supply: AC100 ～ 240V 50/60HZ
Introduction:
Instruction:
For phenotypic measurement and resolution of potted plants. There are three imaging units available: 2D, 3D and hyperspectral. lt can screen and identify mutants, record the growth status of plants, and also study themorphology, color, texture, growth, and component content changes of plants under adversity conditions suchas high temperature, high salt, disease, and insect pests. lt is suitable for genetic breeding, molecular biology,plant physiology, plant pathology, ecology, environmental science, plant protection and other research fields.
TP-plant-HIPS:
The Hyperspectral Plant Digital Acauisition and Analysis System uses hyperspectral imaging for plant image capture and phenotypic analysis. lt enables non-destructive collection of spectral images, vegetation indices, and component contents from potted plants, facilitating mutant screening and the study of plant growth and component changes under stress conditions such as heat, salinity, disease, and pests. lt is ideal for research in genetic breeding, molecular biology, plant physiology, plant pathology, ecology, environmental science, and plant protection.
Imaging Specifications:
Plant nutritional analysis (efficient genotype/mutant screening, water and fertilizer use eficiency). disease recognition (screening for resistant genotypes), and chlorophyll analysis (growth status and resistance genotype screening).
Interactive SpectralAnalysis:
Automatically generates canopy spectral curves, supports region selection for spectral comparison and analysis
Vegetation Index& Biological ParameterAnalysis:
Uses Al algorithms to calculate common indices like NDVl, RVl, and GVl, and analyzes biological parameters such as nitrogen and chlorophyll content using built-in agricultural models
Customizable Modeling:
Allows fast modeling with vegetation indices and custom models for growth, disease and other factors.
Differential Visualization:
Quantifies and visualizes differences in mutant growth and nutrient use efficiency.
Multitype Stress Experiments:
Supports stress tests under conditions like heat, cold, salinity, and drought, and visualizes responses and resistance.
Pest and Disease Analysis:
Compares spectral curves of diseased and healthy plant parts to analyze disease severlty and occurrence.
Application range
Widely used in agriculture, forestry, animal husbandry, grass and other fields
Characteristics
Technical parameterse
Introduction
The plant nutrient analyzer can instantly measure the relative chlorophyll content, nitrogen content, leaf temperature and leaf humidity of plants. The four parameters are measured at the same time and displayed at the same time. It provides a basis for precise fertilization and irrigation of plants, so as to avoid waste and environmental damage caused by excessive fertilization. It is helpful to increase the utilization rate of nitrogen fertilizer and provide reliable soil and crop information for precision agriculture.
Characteristics
1.Be able to save chlorophyll, nitrogen, leaf temperature and leaf humidity at the same time
2.The instrument is small, portable and easy to handle with one hand
3. Non-destructive measurement, it can quickly and non-destructively detect plants, without damaging crop growth
4. Large data storage capacity, using SD card storage, easy to read data, storage capacity up to 2GB, data be export to PC in excel format for further analysis
5. Reasonable power management program, built-in rechargeable lithium battery, each charge can be continuously measured for 12 hours
Technical parameters
| Testing objects | nitrogen, chlorophyll content, leaf temperature, and leaf humidity |
| Nitrogen range | full range |
| Nitrogen accuracy | ±5% |
| Chlorophyll range | 0.0-99.9 SPAD |
| Chlorophyll accuracy | ±1SPAD |
| Leaf temperature | 0-60℃ |
| Leaf temperature accuracy | ±1℃ |
| Leaf humidity range | 0-5g/cm² |
| Leaf humidity accuracy | ±3% |
| Storage capacity | 2G SDcard |
| Measuring Interval | <5s |
| Operating temperature | -10-50°C, 85%RH |
| Power | 4.2V 2200mAh rechargeable Li battery |
| Memory capacity | 2GB, SD card, data be export to PC in excel format for further analysis |
| Weight | 200 g |
Application range
Widely used in agriculture, forestry, animal husbandry, grass and other fields
Characteristics
Technical parameterse
Characteristics
Collect more date. With optical sensor.
Large data storage: data can cache about 500 thousand.
Convenient communication.
Low power consumption and long time consumption.
With GPS positioning device.
With alarm function.
Easy to use.
Technical parameters
Operating Environment:-20℃~ 70℃
Waterproof rating of the shell: IP67
Battery capacity: 20 AH/3.7 V polymer lithium battery.
Others: Standard brackets and solar panels.
Standard Sensor: air temperature, relative humidity, fruit change, stem Micro Change, leaf temperature
Optional sensors: Leaf humidity, light intensity, carbon dioxide, soil moisture, temperature and conductivity, et
Characteristic
Technical parameterse
4.Store 896 test values.
Technical parameters
Introduction
Stoma is the main outlet of water vapor from the internal to the external during transpiration, and also the channel for photosynthesis and respiration to exchange gas with the outside, thus affecting the processes of transpiration, photosynthesis and respiration. The closing and opening of stoma are controlled by guard cells.
Introduction
Stoma is the main outlet of water vapor from the internal to the external during transpiration, and also the channel for photosynthesis and respiration to exchange gas with the outside, thus affecting the processes of transpiration, photosynthesis and respiration. The closing and opening of stoma are controlled by guard cells. The wall thickness of guard cells is different, and cellulose microfibrils are connected with the cell wall, which leads to stomatal opening. When guard cells swelled with water, the thinner outer wall was easy to elongate and expand outward, but microfibrils were difficult to elongate, so stoma opened and transpiration was strengthened. Stoma control the entry and exit of carbon dioxide, so it is related to photosynthesis and respiration. Therefore, the measurement of transpiration rate and stomatal conductance is of great significance to agricultural research, teaching, horticulture research and forestry research.
Parameters
2.Calculation: transpiration rate, stomatal conductance and stomatal impedance.
3.Display: air temperature, air humidity, gas flow, leaf temperature, leaf humidity, atmospheric pressure, PAR, transpiration rate, stomatal conductance, stomatal resistance.
4.Setting: open circuit measurement, closed circuit measurement; closed circuit measurement mode can choose automatic measurement and manual measurement.
5.Storage capacity: more than 150000 groups, SD card data storage.
6.Portable function: portable, with rechargeable battery, can be used in field.
7.Humidity: range: 0-100% RH; automatic temperature correction; resolution: 0.1%; error: ≤± 1.8% RH; response time: 15s.
8.Optical quantum: range: 0-3000 μ mol / m2s1; spectrum: 400-700nm, visible light range; resolution: 1 μ mol / m2s1; error: ± 2%.
9.leaf temperature: range: 0-50 ℃; resolution: ≤ 0.1 ℃; error: ≤ ± 0.2 ℃.
10.Air temperature: range: 0-50 ℃; resolution: 0.1 ℃; error: ± 0.3 ℃.
11.Flowmeter: range: 0.3-1.0L/min; resolution: 0.01L/min; error: ± 2.0%.
12.Power supply: 7.4v 10Ah rechargeable lithium battery with 10 hours service life.
Introduction:
Professional Root Nodule Analysis Assistant, dedicated to advanced analysis of root systems in leguminous crops. One click measurement of nodule number, nodule diameter, nodule R/G/B, color grading, nodule surface area contribution, root length, diameter, area, volume, root tip count, root connectivity analysis, topology analysis, and other indicators.
Product Features:
Introduction:
This instrument is a professional handheld portable measuring tool designed specifically for agriculture, food processing, and scientific research fields, used to accurately measure the hardness of fruits and vegetables. By scientifically accurate measurement, we help users optimize picking time, evaluate product quality, develop storage and transportation plans, and ensure the quality and market competitiveness of the final product.
Product Features:
Technical Parameters:
Appearance Dimensions: 206mm (L) * 85mm (W) * 40mm (H)
Pressure Head Diameter: 1 #: Φ11.1mm、2#：Φ7.9mm、3#：Φ3.5mm
Maximum Load Values: 1 #: 52 kg/cm2, 2 #: 102 kg/cm2, 3 #: 520 kg/cm2
Measurement Unit: kg/cm2、N/cm2、lb/cm2、Kpa
Resolution: 0.01 N/cm2
Measurement Accuracy: 0.1% FS
Depth of Pressure: 10mm
Power Supply: AC100 ～ 240V 50/60HZ
Net Weight of Product: < 500 g
Brief description
1. Widely used in agriculture, farming brewing, food, drink processing industries
2. High accuracy, easy to operate
3. Portable, small volume, light weight, beautiful appearance
4. With automatic temperature compensation function
Technical parameter
Measuring Range: 0-32%
Resolution: 0.20%
Brief description:
1. Can store 896 peaks of data .The LED show the peaks of data, and get ride of the data .
2. Can output data; analyze the data by connected with computer.
3. With digital peak value holding function, hold the peak value for 2 seconds and the peak value will be automatically cancelled.
4. Green environmental-protective: If you do not operate the machine after 10 seconds, the machine will be shut down automatically.
Technical parameters:
| Model | GY-4 | |
| Measurement Range | 0.2 – 15 Kg/cm2 (×105 Pa ) | 0.4 – 30 Kg/cm2 (×105 Pa ) |
| Division value | 0.01 Kg/cm2 | 0.01 Kg/cm2 |
| Pressure head diameter | 1# ¢11.1mm | 2# ¢7.9mm |
| Precision | ±1% | |
| Indication error | ±0.5% | |
| Unit | Kg/cm2(×105 Pa) | |
| Data interface | RS232 nine-hole socket | |
| Display mode | Digital | |
| Sensor structure | Tye sensor with high precision (inner sensor) | |
| Insertion depth of pressure head | 10mm | |
| Ambient temperature | 5°c~35°c | |
| Ransport temperature | -10°c~60°c | |
| Relative humidity | 15%~80%RH | |
| Net weight | 450g | |
| Outline dimension | 230*66*36mm | |
The Characteristics:
1. Small and portable, user-friendly
2. 2AAA batteries, can accurately test anytime and anywhere,
3. Touch key, comfortable and beautiful
4. Special designed sample place, avoid sample spilling, easy to clean
5. Cannot test the sugar content but also test the temperature of measured stuffs, automatic temperature compensation
6. Fast measuring speed, measuring just 3s once
7. Wide measuring range, suitable for almost any liquid measurement such as fruit juice, food and drink and so on
8. Display mode: large LCD display.
The Characteristics:
1. Small and portable, user-friendly
2. 2AAA batteries, can accurately test anytime and anywhere,
3. Touch key, comfortable and beautiful
4. Special designed sample place, avoid sample spilling, easy to clean
5. Cannot test the sugar content but also test the temperature of measured stuffs, automatic temperature compensation
6. Fast measuring speed, measuring just 3s once
7. Wide measuring range, suitable for almost any liquid measurement such as fruit juice, food and drink and so on
8. Display mode: large LCD display.
Soxhlet Extraction Fat Analyzer
Characteristic:
Technical parameters
Characteristics
Main technical parameters
Introduction
NMR Oil Content Analyzer is specially used for testing oil content in oil crops.
Characteristic
1 .High efficiency, sample can be tested within 30s.
2.Safe, nondestructive, no pollution, low carbon, environmentally friendly.
Read More
| Model | HCY-20 |
| Test variety | Test oil content in bean, rapeseed, sesame, corn, cottonseed, sunflower seed, Peanut seed, wheat, bancoul nut, volatile matter and so on. |
| Feature | Color LCD, mouse + keyboard, computer operation software carries on adjusting the frequency automatically, The data can be copied by USB flash disk to the computer and printed, software upgrades through USB flash disk |
| Technical parameter | Sample volume: 40ml
Oil measuring range: 0.1%-100% Precision: +0.2% Stability: +0.1% Power source: 220V, 50HZ Power consumption: ≤40W |
Name: Digital Flour Quality Analyzer
Model: HZF-150
Characteristics:
Name: Digital Flour Quality Analyzer
Model: HZF-150
Characteristics:
Flour-rubbing bowl can be changed at will: 300g and 50g flour-rubbing bowl optional exchange, program automatic identification to bowl type and automatic adjust to corresponding program, without the operator choice.
Overload protection function: alarm and shutdown when the mixing torque is too large, protect instrument and people.
One-button automatic water system, instead of hand-press rubber ball, control water adding to the weeping pipe, energy-saving and efficient.
Simultaneously display up to 10 flour quality charts, which facilitates contrasting their differences.
Results saved in Access database, the consult is convenient.
Multiple security measurements: double-button to start; open the cover, machine will stop automatically.
Intelligent programs respond to instrument movement, start drawing automatically.
Technical parameters:
Motor power: 200W
Power: AC220V, 50Hz or AC380V, 50Hz
Computer connector mode: USB
Torque testing mode: electronic torque sensor
Weight: 75kg (with 300g bowl)/ 70kg (with 50g bowl)
Accuracy: no more than 0.5% measuring range
Main douching cutter rotating speed: 63r/min±2r/m
Sub-douching cutter rotating speed: 94.5r/min±3r/m
Coordinate scale ranges: horizontal axis: 0-20min, vertical axis: 0—1000FU
Horizontal axis speed: 10mm/min
Sample weight 300g (300g bowl) or 50g(50g bowl) Shape size: 95(L)x53(W)x62(H)cm
Related Products:
Falling Number Meter/Magnetic Metal Meter/Amylose Tester/Whiteness Analyser/Lab Whirlwind Mill
Brief Introduction
Rice quality detector can automatically analyze and evaluate all kinds of rice (indica rice, japonica rice, glutinous rice, silk seedling rice, special rice, organic rice, etc.). It is a professional instrument which can automatically detect rice quality index after obtaining rice image by scanner. It is often used in rice and product quality supervision and testing center, rice joint laboratory, gene research center, genetic and developmental biology institute, grain circulation enterprises, processing enterprises and so on.
Characteristics
The rice quality testing instrument adopts image scanning and acquisition method, and it uses general computer and special processing software for image processing.
Technical parameters
1.Scanner: optical resolution:4800*9600 scanning width: 30 cm*20 cm
the minimum pixel size:0.0053mm*0.0026 mm
the weight of rice can reach 30 grams.
2.Automatic detection 30g rice appearance quality index time about 30s.
3.Single test sample quantity: 1-1200 pieces
recommended sample quantity:12g
4.Measurement error of long width: ≤± 05mm
5.Error of the whole rice rate: ≤± 1. 0%
6.chalky whiteness:≤1. 0%
Pesticide Residue Tester-Pesticide Residue Analysis and Testing
Pesticide Residue Testing identifies the pesticide residue levels in food products by undergoing a thorough chemical and microbiological analysis and gives food manufacturers and producers confidence of their product ingredients.
Model: NY-8DA/NY-16DA
Characteristics
The rice quality testing instrument adopts image scanning and acquisition method, and it uses general computer and special processing software for image processing.
Technical parameters
1.Scanner: optical resolution:4800*9600 scanning width: 30 cm*20 cm
the minimum pixel size:0.0053mm*0.0026 mm
the weight of rice can reach 30 grams.
2.Automatic detection 30g rice appearance quality index time about 30s.
3.Single test sample quantity: 1-1200 pieces
recommended sample quantity:12g
4.Measurement error of long width: ≤± 05mm
5.Error of the whole rice rate: ≤± 1. 0%
6.chalky whiteness:≤1. 0%
Introduction:
The Insect Behavior Tracking nd Analyzing System analyzes and records insect activity videos through software, automatically detects and identifies insects in the videos, tracks their movement trajectories, records relevant movement parameters during movement, displays and saves data in real-time during the tracking process, Read More
Software Features (Insect Behavior Analysis):
Multi Parameter Acquisition and Analysis:
Motion: D 、T 、V 、（X，Y）
Total Duration of Stay
Umber of Stops
Number of Boundary Crossings
Retained Trajectory Map
Tracked Insect Motion Video
Insect Recognition Model:
Insect Gallery: There are already tens of thousands of insect galleries. Train insect recognition models through deep learning methods.
Remote update: Users can transmit insect movement videos to the server based on their own research insects, update dedicated models, and install remotely.
High Throughput Analysis:
Multi video processing analysis:simultaneously tracking videos of 96 parallel projects.
Multi target tracking analysis: supports simultaneous tracking of multiple target insects, and can adjust information such as the size of the target insects to be tracked.
Intelligent Design:
Manual recording: Manually record event information, such as excretion, egg laying, enemy defense, etc., while also recording the time, duration, and frequency of the event.
Target merging: For tracking lost targets, the data of new and old targets can be merged by merging the sequential numbers of the same target.
Custom Module:
Insect attributes: such as gender, serial number, dosage, etc.
Experimental area: Cut, divide, calibrate, and independently record experimental data.
Data Import and Export:
Import:real-time video input and recorded video import.
Export: Preview and filter, confirm accuracy before exporting. Data (EXCEL), tracking trajectory chart (PNG), tracking video (MP4).
Characteristics:
Characteristics:
Technical parameter:
Characteristics
Characteristics
Characteristic
Technical parameters
Characteristic
Characteristic
Technical parameter
Model Difference
| Model | Specifications | Dimension（W x D x H） |
| CZ-250FC | Volume: 250L (Single door) | 580×630×1755mm |
| CZ-300FC | Volume: 300L (Single door) | 580×630×1895mm |
| CZ-450FC | Volume: 450L (Single door) | 610×708×1865mm |
| CZ-1000FC | Volume: 1000L (Double door) | 1230×708×1865mm |
| CZ-1600FC | Volume: 1600L (Triple door) | 1855×708×1865mm |
Characteristic
Characteristic
Technical parameters
This meter is a perfect combination of the most advanced electronic technology, sensor technology, and software design. The meter can measure the parameters of pH, ORP, conductivity, TDS, salinity, resistivity, DO and temperature for high accuracy water solution. It is the best portable water analysis meter with the highest performance and the lowest cost. It is suitable for trade such as the mining industry, power plant, water treatment projects, environmental protection, etc., especially has more extensive application in the field and spot test.
Characteristic
Technical parameter
Model Difference
| Model | Specifications | Dimension（W x D x H） |
| CZ-250FC | Volume: 250L (Single door) | 580×630×1755mm |
| CZ-300FC | Volume: 300L (Single door) | 580×630×1895mm |
| CZ-450FC | Volume: 450L (Single door) | 610×708×1865mm |
| CZ-1000FC | Volume: 1000L (Double door) | 1230×708×1865mm |
| CZ-1600FC | Volume: 1600L (Triple door) | 1855×708×1865mm |
Introduction
Liquid-liquid extraction is a method of transferring solute substances from one solvent to another by using the difference in solubility or distribution coefficient of substances in two immiscible (or slightly soluble) solvents. Traditional manual extraction is labor-intensive, inefficient, and has the risk of inhaling toxic gases
Introduction
Liquid-liquid extraction is a method of transferring solute substances from one solvent to another by using the difference in solubility or distribution coefficient of substances in two immiscible (or slightly soluble) solvents. Traditional manual extraction is labor-intensive, inefficient, and has the risk of inhaling toxic gases.
DH3160 vertical oscillating liquid-liquid extractor absorbs the advantages of the same type of products and adopts the vertical oscillating extraction method; it can process different types of containers such as 125ml-2000ml separatory funnels, colorimetric tubes, conical flasks, and volumetric flasks in the same batch; The process is automatically degassed, the gas source is collected centrally and processed uniformly through the protection core, one-key start, intelligent program setting, leakage protection, etc., to realize the automation of the entire extraction experiment. While improving the extraction efficiency, the contact between humans and toxic gases is effectively avoided. Mainly used in food, environment, sanitation, pharmaceutical, industrial and other laboratory water quality analysis where liquid-liquid extraction is required, such as: organic solvent extraction, soil component extraction, pesticide residues, water pollutants, etc.
Technical Parameters
1. Control mode: 7-inch large screen LCD touch screen control system
2. Extraction method: vertical oscillation
3. Extraction venting: automatically identify the air pressure venting in the container (separation funnel)
4. Bleeding procedure: program setting of bleeding interval and single bleeding time; When deflating, the instrument will stop vibrating automatically, and the instrument will start automatically after deflating
5. Bleeding times: the screen displays the bleeding times in real time
6. Extraction strength: 0 ~ 2000r / min
7. Time accuracy: the extraction time is accurate to s and the deflation time is accurate to Ms
8. Extraction procedure: the extraction mode requires diversified control, and the extraction time, extraction frequency, exhaust interval, exhaust time and timing extraction can be programmed
9. Timing method: computer countdown is adopted, which is more intuitive and convenient
10. Program scheme: at least 8 kinds of extraction oscillation schemes can be stored (the program can be changed by itself)
11. Extraction quantity: no less than 6 samples in batch
12. Batch processing: the containers that can be batch processed include 125ml ~ 2000ml separating funnel, etc
13. Waste gas treatment: collected uniformly and discharged after absorption by activated carbon.
Your dedicated partner in providing high-quality laboratory and research equipment. With years of industry experience, we specialize in supplying cutting-edge laboratory instruments, research equipment, and essential lab tools to support scientific discovery, educational advancement, and innovation across various industries.
© 2025 | REIDIUS TECHNOLOGIES | All Rights reserved.