The heating of this incubator is a forced air circulation; it is the ideal solution when it comes to meeting growth and incubation requirements for research, pharmaceutics, medicine and food chemistry.
Thanks to their exceptional efficiency and perfect temperature, this new generation of incubators has real appeal.
• Air forced convection
• 7 segment digital display
• Programmable PID microprocessor control system.
• Programmable temperature and timer function
• Ambient temperature + 20 °C to 100 °C
• Temperature homogeneity and stability accordance to DIN 12880.
• automatic thermostatic protection
• automatic adjustable ventilation
• 2 chrome-plated racks
• functional stainless steel AISI 304 interior chamber
• 2 years guarantee worldwide
| Temperature | |
|---|---|
| Working temperature range | min. +20°C ambient up to +100°C |
| Temperature fluctuation | 0.1°C |
| Temperature accuracy | ± 0.3 % (Over full scale) |
| Temperature unit | easy to choose Celsius or Fahrenheit |
| Temperature sensor | 1 Pt100 sensor DIN class A in 2-wire-circuit |
| Control technology | |
|---|---|
| Language setting | English as default language |
| Control | Adaptive multifunctional digital PID-microprocessor controller |
| Display | 4 digits, 7 segment digital display |
| Timer | Digital backward counter to target time setting |
| Timer control | Adjustable from 1 minute to 99:59 hour or continues |
| Delay timer | Programmable time delay function |
| Function set point wait | The timer does not start until the set temperature reached to the set point |
| Adjustable parameter | Temperature and time, automatic fan adjustable |
| Standard equipment | |
|---|---|
| External Door | External steel door with compression door lock |
| Internal door | Inner door made of tempered safety glass |
| Calibration certificate | calibration certificate at +100°C (optional) |
| Interior | easy-to-clean interior made of stainless steel AISI 304 on all sides |
| Gasket | synthetic rubbers gasket |
| Housing | Electrostatic powder coated galvanized steel |
| Insulation | Fully isolated chamber by Rockwool covered by aluminum sheet to ensure high temperature stability. |
| Emergency knob | Manual knob in case of emergency |
| External dimensions | 530 (W) X 570 (D) X 650 (H) mm |
| Shelves | 2-shelves chrome plated |
| Interior | |
|---|---|
| Internal dimensions | 400 (W) X 410 (D) X 400 (H) mm |
| Chamber | Easy to clean Stainless steel material no.: EN 1.4301 (AISI 304) |
| Useful volume | 55 litter |
| Standard shelves | 2-shelves chrome plated |
| Max. number of shelves | 8 |
| Permitted load | 110 Kg |
| Load per shelve | 15 KG |
| Ventilation | |
|---|---|
| Fan | forced air circulation by quiet air turbine automatically adjustable |
| Safety | |
|---|---|
| Auto diagnostic system | Audible alarm for fault analysis |
| Alarm | audible, can be switched off, adjustable limit on the independent temperature safety device |
| Standards | integrated independent temperature safety device with visual alarm accordance DIN 12880 EN 61010-1, EN 61010-2-010 in accordance EU directive 2014/35/EU DIN EN 61326-1:213, EN 61326-1 in accordance EU directive 2014/30/EU |
| Class | class I in accordance with the EU directive MDD 93/42/EEC |
| Protection Class | IP20 according to EN 60529 |
| working conditions | |
|---|---|
| Installation | • The distance between the wall and the rear of the appliance must be at least 15 cm. The sides distance must be not less than 5 cm. the distance from the ceiling must not be less than 20 cm. |
| Temperature | +5 °C to +55 °C |
| Humidity | Max. 80% rh |
| Electrical data | |
|---|---|
| Voltage | 230 volts , 50/60Hz |
| Watt | 1500 watt * Other voltages available on request |
| Shipping information | |
|---|---|
| Customs tariff number | 8419 8998 |
| Dimensions approx incl. carton | 620 (W) X 640 (D) X 750 (H) mm |
| Net weight | 45 Kg |
| Gross weight carton | 55 Kg |
| Description | Model | Article number |
|---|---|---|
| Incubator 56 Lt – Digital Display – AMBIENT TEMPERATURE: +20 ºC to 100 ºC – 230V, 50/60Hz | DI 55 | 1052.300 * Other voltages available on request |
| Description | Article number |
|---|---|
| Digital display touch screen 2.8 inch | 100 |
| Digital display touch screen 4.3 inch | 200 |
| Analogue display | 300 |
| Wire rack | 400 |
| Calibration certificate at 37 ˚C | 500 |
| English language for software | 000 |
| German language for software | 001 |
| French language for software | 002 |
| Turkish language for software | 003 |
DRAGLAB ovens are innovative units that combine efficiency and performance with exceptionally high levels of precision and ease of handling.
The temperature range from 20 °C to 250°C. Short heating up times and effective thermal insulation feature on the list of benefits they offer.
This oven production line includes programmable PID microprocessor with forced air convection, and wide range of sizes to suit your requirements
• Air forced convection
• 7 segment digital display
• Programmable PID microprocessor control system.
• Programmable temperature and timer function
• Ambient temperature + 20 °C to 250 °C
• Temperature homogeneity and stability accordance to DIN 12880.
• automatic thermostatic protection
• automatic adjustable ventilation
• 2 chrome-plated racks
• functional stainless steel AISI 304 interior chamber
• 2 years guarantee worldwide
| Temperature | |
|---|---|
| Working temperature range | min. +20°C ambient up to +250°C |
| Temperature fluctuation | 0.1°C |
| Temperature accuracy | ± 0.3 % (Over full scale) |
| Temperature unit | easy to choose Celsius or Fahrenheit |
| Temperature sensor | 1 Pt100 sensor DIN class A in 2-wire-circuit |
| Control technology | |
|---|---|
| Language setting | English as default language |
| Control | Adaptive multifunctional digital PID-microprocessor controller |
| Display | 4 digits, 7 segment digital display |
| Timer | Digital backward counter to target time setting |
| Timer control | Adjustable from 1 minute to 99:59 hour or continues |
| Delay timer | Programmable time delay function |
| Function set point wait | The timer does not start until the set temperature reached to the set point |
| Adjustable parameter | Temperature and time, automatic fan adjustable |
| Standard equipment | |
|---|---|
| Door | Fully insulated stainless steel door with compression door lock |
| Calibration certificate | calibration certificate at +100°C (optional) |
| Interior | easy-to-clean interior made of stainless steel AISI 304 on all sides |
| Gasket | synthetic rubbers gasket |
| Housing | Electrostatic powder coated galvanized steel |
| Insulation | Fully isolated chamber by Rockwool covered by aluminum sheet to ensure high temperature stability. |
| Emergency knob | Manual knob in case of emergency |
| External dimensions | 530 (W) X 570 (D) X 650 (H) mm |
| Shelves | 2-shelves chrome plated |
| Interior | |
|---|---|
| Internal dimensions | 400 (W) X 410 (D) X 400 (H) mm |
| Chamber | Easy to clean Stainless steel material no.: EN 1.4301 (AISI 304) |
| Useful volume | 56 litter |
| Standard shelves | 2-shelves chrome plated |
| Max. number of shelves | 8 |
| Permitted load | 110 Kg |
| Load per shelve | 15 KG |
| Ventilation | |
|---|---|
| Fan | forced air circulation by quiet air turbine automatically adjustable |
| Safety | |
|---|---|
| Auto diagnostic system | Audible alarm for fault analysis |
| Alarm | audible, can be switched off, adjustable limit on the independent temperature safety device |
| Standards | integrated independent temperature safety device with visual alarm accordance DIN 12880 EN 61010-1, EN 61010-2-010 in accordance EU directive 2014/35/EU DIN EN 61326-1:213, EN 61326-1 in accordance EU directive 2014/30/EU |
| Class | class I in accordance with the EU directive MDD 93/42/EEC |
| Protection Class | IP20 according to EN 60529 |
| working conditions | |
|---|---|
| Installation | • The distance between the wall and the rear of the appliance must be at least 15 cm. The sides distance must be not less than 5 cm. the distance from the ceiling must not be less than 20 cm. |
| Temperature | +5 °C to +55 °C |
| Humidity | Max. 80% rh |
| Electrical data | |
|---|---|
| Voltage | 230 volts , 50/60Hz |
| Watt | 1500 watt * Other voltages available on request |
| Shipping information | |
|---|---|
| Customs tariff number | 8419 8998 |
| Dimensions approx incl. carton | 620 (W) X 640 (D) X 750 (H) mm |
| Net weight | 45 Kg |
| Gross weight carton | 55 Kg |
| Description | Model | Article number |
|---|---|---|
| Drying oven 56 Lt – Digital Display – AMBIENT TEMPERATURE: +20 ºC to 250 ºC – 230V, 50/60Hz | DO 55 | 3051.300 * Other voltages available on request |
| Description | Article number |
|---|---|
| Digital display touch screen 2.8 inch | 100 |
| Digital display touch screen 4.3 inch | 200 |
| Analogue display | 300 |
| Wire rack | 400 |
| Calibration certificate at 37 ˚C | 500 |
| English language for software | 000 |
| German language for software | 001 |
| French language for software | 002 |
| Turkish language for software | 003 |
Professional fully automatic water distiller with built-in 16 litter storage tank. Automatically – controlled water distiller made of high quality stainless steel. Designed for producing high purity distillate without full-time personnel control.
Distillate produces has conductivity approximately 2.5 μS/cm. All parts for installation (hoses, etc.) are included.
• Durable, reliable and Low cost
• High purity distilled water – conductivity approx 2,5 μS/cm
• Built-in 16 litter storage tank
• Automatic water switching and power cut-off
• Electronic water level switch
• Automatic thermostatic cut-off safety system
• Hearing element made of high quality stainless steel
• All material contact water made of stainless steel AISI 304
• Easily accessed evaporator & storage tank for effortless cleaning and maintenance
• The unit is suitable for both bench and wall mounting.
• All parts and tools for installation included.
• CE Certificate
• 2-years warranty
| Capacity | |
|---|---|
| Capacity | 8 Litter / hour |
| Storage Tank | 16 Litter storage tank built-in |
| Consumption | 80 litter / hour |
| Conductivity | approximately 2,5 μS/cm |
| Control technology | |
|---|---|
| Fully Automatic | Automatic power cut-off, in case of low water, to protect the heating element Automatic start when the water at sufficient level in the evaporator tank Automatic thermostatic cut-off |
| Electronic level switch | Stop automatically in case of water level in storage tank is full Start automatically when distillate water is withdrawn from storage tank |
| Water supply | Solenoid valve built-in connection for evaporator and condenser Automatic solenoid valve switching on in case of low water level on evaporator tank Automatic solenoid valve switching off in case of high water level on evaporator tank |
| Standard equipment | |
|---|---|
| Internal material | Evaporator tank made of stainless steel material no. EN 1.4301 Condenser (cooler) made of stainless steel, material no. EN 1.4301 Heating element made of stainless steel, material no. EN 1.4876 Storage tank made of stainless steel material no. EN 1.4301 |
| External material | Housing material made of galvanized steel, electrostatically powder coated |
| Degassing system | Degassing system through a vent in the top of the unit |
| Accessing interior | Easily accessed evaporator & storage tanks for cleaning and maintenance |
| Installation | All parts and tools for installation included |
| distillate water withdrawal | The drain tap can be opened in either continuous or touch position |
| Main switch | Main switch button on the front of the unit |
| Led light | Two led lights on the front of the unit, green light for ready operation and red light to indicate that heating element is switching on |
| Mounting | Suitable for bench and wall mounting |
| Safety | |
|---|---|
| Water | Low water cut-off to protect heating element |
| Heating | Overheating cut-off |
| Led light | Led light alarm |
| Degassing | low-gas, bacteria and pyrogen free |
| Power connection | power cable with German shock-proof type (Schuko) plug |
| Connection | |
|---|---|
| Water inlet | Cooling water inlet on the right-hand side of the unit Water inlet diameter 3/4 inch (Ø 19.05 mm), |
| Water pressure | From 2 bar to max 10 bar |
| Water outlet | Cooling water outlet on the right-hand side of the unit Water outlet diameter 2/5 inch (inner Ø 10 mm) |
| Distillate water | Distillate withdrawal through drain tap on the front of the unit |
| Power | Main connection cable on the left-hand side of the unit |
| Electrical data | |
|---|---|
| Voltage | 400 V / 3ph 50…60 Hz |
| Watt | 6000 watt |
| Shipping information | |
|---|---|
| Customs tariff number | 8419 / 4090 |
| Packaging Dimension | 90 W X 60 D X 80 H, CM |
| Net weight | 35 Kg |
| Gross weight | 45 Kg |
| Description | Model | Article number |
|---|---|---|
| Water still 8L/h with 16L storage tank, 400V/50-60Hz | DS 8008 | 5008.000 * Other voltages available on request |
| Description | Article number |
|---|---|
| Mains water inlet tap | 100 |
| Distilled water record | 200 |
| Waste water record | 300 |
| Drain tap | 400 |
| Heating element | 500 |
| Silicon hose | 600 |
The Drag Lab water bath is an ideal solution for various laboratory applications including biotechnology, chemistry, and environmental sciences. It offers precise PID digital temperature control ranging ambient from 5ºC to 100ºC. DragLab water bath model DW 06 is a 6 litter useful tank volume and comes with an inte grated drain faucet and adjustable feet, ergonomic grip making it easy to handle and safe to use.
| Temperature | |
|---|---|
| Setting temperature range | +5.00 ºC to 100.00 ºC |
| Setting accuracy Temperature | e 0.1 ºC |
| Temperature unit | Easy to choose Celsius or Fahrenheit |
| Temperature sensor | 1 Pt100 sensor DIN class A in 2-wire-circuit. |
| Control technology | |
|---|---|
| Controller | PID microprocessor digital controller |
| Display | 4 digits, 7 segment digital display |
| Calibration | 1 point calibration. |
| Timer | Digital timer from 1 min. up to 9999 min. with delay function |
| Standard equipment | |
|---|---|
| Heating element | Heating element made of stainless steel (material no.: EN 1.4301). |
| Drain system | Integrated with drain tap – easy to empty |
| External material | Housing material made of galvanized steel, electrostatically powder-coated |
| Circulation | Built in circulating pump to enhance performance and temperature homogeneous |
| Main switch | The mains switch with led light and protected against spray water |
| cover | stainless steel cover reduces heat loss and ensures a uniform temperature |
| Interior | |
|---|---|
| Internal material | Internal tank made of stainless steel AISI 304 |
| Internal dimensions | 300 W X 330 D X 200 H (mm) |
| Plate | The perforated bottom plate is included. |
| Volume | 15 litter |
| Liquid level minimum | 40 mm |
| Liquid level maximum | 165 mm |
| Safety | |
|---|---|
| Alarm | Adjustable limit on the independent temperature safety device |
| Auto diagnostic system | microprocessor PID-temperature controller with integrated autodiagnostic |
| Class | Class I in accordance with the EU directive MDD 93/42/EEC |
| Protection Class | IP20 according to EN 60529 |
| Standards | EN 61010-1 and EN 61010-2-010 in accordance with EU directive 2014/35/EU EN 61326:2021 in accordance with EU directive 2014/30/EU |
| Electrical data | |
|---|---|
| Voltage | 230 volts, 50/60Hz |
| Watt | 1000 watts |
| Shipping information | |
|---|---|
| Customs tariff number | 8419 8998 |
| Dimensions approx incl. carton | 430 X490 X 390 (mm) |
| Net weight | 20 Kg |
| Gross weight carton | 22 Kg |
| Description | Model | Article number |
|---|---|---|
| Water Bath volume 15 L, 220V/50-60 Hz | DW 15 | 2015.000 |
| Description | Model | Article number |
|---|---|---|
| Water Bath volume 6 L, 220V/50-60 Hz | DW 06 | 2006.000 |
| Water Bath volume 10 L, 220V/50-60 Hz | DW 10 | 2010.000 |
| Water Bath volume 25 L, 220V/50-60 Hz | DW 25 | 2025.000 |
| Water Bath volume 35 L, 220V/50-60 Hz | DW 35 | 2035.000 |
| Water Bath volume 50 L, 220V/50-60 Hz | DW 50 | 2050.000 |
| Water Bath volume 15 L, 220V/50-60 Hz | DW15 | 2015.000 |
Your dedicated partner in providing high-quality laboratory and research equipment. With years of industry experience, we specialize in supplying cutting-edge laboratory instruments, research equipment, and essential lab tools to support scientific discovery, educational advancement, and innovation across various industries.
© 2025 | REIDIUS TECHNOLOGIES | All Rights reserved.